+65 68631676

tig@wilhelm-group.com

Hot Wire Tig Cladding

WILHELM (S.E.A.) Pte. Ltd. provides weld overlay cladding using fully automated Hot Wire TIG machines. The Hot Wire TIG process uses both single and tandem torch with single and twin wire feeding configurations. All of our weld overlay procedures are qualified as per ASME Section IX with reference to relevant industry standards such as NACE MR0175 and API 6A to name a few. Customer specifications (e.g. % Iron dilution) are also considered and achieved accordingly with our Hot wire TIG process.

- Smallest bore down to 40mm ID with length limitation

Common Base Material Grades API 5L X52 to X70, A106 Gr. B, ASTM A333 Gr.6, A182, A350, A694, AISI 4130, 8630
Common Weld Overlay Grades STAINLESS Steel 316L, 410, 904L, Duplex/Super Duplex, MONEL Alloy 200, 400; INCOLOY 825, INCONEL 625,
C22; C276, Copper Nickel Alloy and others on customer requirement.
CRA Clad Pipe, Tubular Components Weld overlay of pipe in up to 6m lengths, extended to 12m by “double jointing”
Flanges and Connectors Flanges / Swivel Ring Flange :1-1/2”NB (min)
Bends (3D-5D) or on customer requirement, SR/LR Elbows, Tees, Reducers, Hubs /Caps Weld overlay can be carried out on elbows prior
to forming or after induction bending depending on
the dimensions.
Pressure Vessel Components CRA clad nozzles, vessel strakes, tube sheets
Valves & Valve Components Blocks, Manifolds, Gates, Seats, Bonnets, Ball Plug,
Xmas Trees
Working Capabilities - Pipe cladding start from 4” diameter
Fabrication Services Offer fully fabricated clad pipe spools including radiography,
hydrostatic testing and external coating if required.